Canon Bubble Jet Printers Only Prints ½ to ¾ of a Full Page

Date Originated:

Product(s) Affected:

Symptom(s):

Suggestion(s):

1. Run CMOS Setup and change the printer port DMA to 378-37A, 778-77A, at IRQ 7.
2. Exit and save the changes you just made in CMOS Setup
3. After Windows 95' loads, right click on MY COMPUTER.
4. Select (left click on) PROPERTIES.
5. Select DEVICE MANAGER, then select PORTS(Com&LPT)
6. Select ECP Printer Port, then select PROPERTIES.
7. Select RESOURCES.
8. Deselect USE AUTOMATIC SETTINGS and scroll down the Basic Configuration List and select Interrupt Request 07-Input/Output Range 0378-037F-Input/Output Range 0778-077A.
9. SelectOK.