This printer driver is designed to be installed under Windows 
2000. To install the driver, use the following procedures, 
referring to your Windows 2000 documentation if necessary.

Note:
You must have full-control access to printer settings to carry out
an installation.


  1.  Log on to Windows 2000 as a member of the [Administrators] 
      group.
  2.  Click [Start].
  3.  From [Settings], select [Printers].
  4.  Double-click [Add Printer].  The Add Printer Wizard starts.
  5.  On the [Local or Network Printer] panel, make sure 
      [Automatically detect my printer] is unchecked, then click 
      [Next].
  6.  Select LPT1 or whichever port you want to use.
  7.  When the list of printers appears click [Have Disk...].
  8.  Specify the folder containing the downloaded and extracted 
      printer driver files and click [OK].
  9.  Make sure the name of the printer you want to install is 
      correct and click [Next].

  Note:
  In some cases, a [Use Existing Driver] panel appears next. If it
  does, select the [Replace existing driver] option to install the
  driver.

  10. Respond appropriately to the remaining screens of the [Add 
      Printer] Wizard.
  11. In the final step of the [Add Printer] Wizard,"Completing 
      the Add Printer Wizard", click Finish.  A [Digital Signature
      Not Found] Dialog Box will appear and ask "Do you want to 
      continue the installation?".  Click Yes to continue.  A 
      printer icon appears once installation is complete.

  Note:
  When using the LPT port on your computer, the Windows Plug and
  Play feature [Found New Hardware] Wizard may appear when you 
  start your computer. If this happens, click Cancel to exit the 
  automatic driver installation.  Only the [Add Printer] Wizard 
  should be used to install your driver.